Part Number Hot Search : 
MCP433 EP9331 EP9331 MAX739 DLN10 SB2ST4 EP9331 29F32
Product Description
Full Text Search
 

To Download 111CNQ045ASM Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Bulletin PD-20.758 rev. A 03/02
111CNQ045A
SCHOTTKY RECTIFIER New GenIII D-61 Package
Major Ratings and Characteristics Characteristics
IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 s sine VF TJ @55 Apk, TJ = 125 C (per leg) range
110 Amp
Description/Features
The 111CNQ045A center tap Schottky rectifier module has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. 175 C TJ operation Center tap module Very low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Low profile, small footprint, high current package
111CNQ045A Units
110 45 4000 0.55 A V A V
- 55 to 175
C
New fully transfer-mold low profile, small footprint, high current package
Case Styles
111CNQ045A 111CNQ045ASM 111CNQ045ASL
D61-8 www.irf.com
D61-8-SM
D61-8-SL 1
111CNQ045A
Bulletin PD-20.758 rev. A 03/02
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V)
111CNQ045A
45
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 Per Leg Per Device
111CNQ Units
55 110 4000 600 54 8 A mJ A A
Conditions
50% duty cycle @ TC = 152 C, rectangular wave form 5s Sine or 3s Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied
Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg)
TJ = 25 C, IAS = 8 Amps, L = 1.7 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
VFM Max. Forward Voltage Drop (Per Leg) (1)
111CNQ Units
0.61 0.75 0.55 0.69 1.5 65 3900 5.5 10000 V V V V mA mA pF nH V/ s @ 55A @ 110A @ 55A @ 110A
Conditions
TJ = 25 C TJ = 125 C VR = rated VR
IRM CT LS
Max. Reverse Leakage Current (Per Leg) (1) Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg)
TJ = 25 C TJ = 125 C
VR = 5VDC, (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change (Rated VR)
(1) Pulse Width < 300s, Duty Cycle <2%
Thermal-Mechanical Specifications
Parameters
TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range
111CNQ Units
-55 to 175 -55 to 175 0.5 0.25 0.30 7.8 (0.28) Min. Max. 40 (35) 58 (50) C C
Conditions
RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink (D61-8 Only) wt T Approximate Weight Mounting Torque (D61-8 Only)
C/W DC operation C/W DC operation C/W Mounting surface , smooth and greased Device flatness < 5 mils g (oz.) Kg-cm (Ibf-in)
2
www.irf.com
111CNQ045A
Bulletin PD-20.758 rev. A 03/02
1000
1000
Tj = 175C
100
Reverse Current - I R (mA)
150C 125C
10 1 0.1
100C 75C 50C 25C
Instantaneous Forward Current - I F (A)
100
0.01 0.001 0 5 10 15 20 25 30 35 40 45
Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg)
10000
10
Tj = 175C Tj = 125C Tj = 25C
1 0 0.5 1 1.5 2
Forward Voltage Drop - VFM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg)
Junction Capacitance - C T (p F)
Tj = 25C
1000 0 5 10 15 20 25 30 35 40 45
Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg)
1
(C/W)
D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20
PDM
thJC
0.1
Thermal Impedance - Z
0.01
Single Pulse (Thermal Resistance)
Notes:
t1 t2
1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc
0.001 0.00001
0.0001
0.001 0.01 0.1 t1 , Rectangular Pulse Duration (Seconds)
1
10
Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)
www.irf.com
3
111CNQ045A
Bulletin PD-20.758 rev. A 03/02
180
Allowable Case Temperature (C) Average Power Loss (Watts)
50 40 30
RMS Limit DC D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20
170
DC
160 150 Square wave (D = 0.50)
80% Rated Vr applied
20 10 0
140 see note (2) 130 0 10 20 30 40 50 60 70 80 90
Average Forward Current - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg)
Non-Repetitive Surge Current - I FSM (A)
0
10 20 30 40 50 60 70 80
Average Forward Current - IF(AV) (A)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
10000
1000
At Any Rated Load Condition And With Rated Vrrm Applied Following Surge
100 10
Square Wave Pulse Duration - tp (microsec)
100
1000
10000
Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)
L HIGH-SPEED SWITCH FREE-WHEEL DIODE 40HFL40S02 Vd = 25 Volt
DUT
IRFP460 Rg = 25 ohm
+
CURRENT MONITOR
Fig. 8 - Unclamped Inductive Test Circuit
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR
4
www.irf.com
111CNQ045A
Bulletin PD-20.758 rev. A 03/02
Outline Table
Outline D61-8
Dimensions are in millimeters and (inches)
Outline D61-8-SM
Dimensions are in millimeters and (inches)
www.irf.com
5
111CNQ045A
Bulletin PD-20.758 rev. A 03/02
Outline Table
Outline D61-8-SL
Dimensions are in millimeters and (inches)
Marking Information
INTERNATIONAL RECTIFIER LOGO THIS IS A 111CNQ045A WITH LOT CODE 89 09 ASSEMBLED ON WW 45, 2000 IN THE ASSEMBLY LINE "A" ASSEMBLY LOT CODE PART NUMBER
111CNQ045A 89 09 045A DATE CODE YEAR 0 = 2000 WEEK 45 LINE A
6
www.irf.com
111CNQ045A
Bulletin PD-20.758 rev. A 03/02
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/02
www.irf.com
7
This datasheet has been download from: www..com Datasheets for electronics components.


▲Up To Search▲   

 
Price & Availability of 111CNQ045ASM

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X